The frequent occurrence of drinking water pollution incidents has prompted the sales of water filters to soar. Now many households and business units have installed water filters. The effect of the water filters can only be exerted by installing them in the correct way. We have sorted out the installation methods and precautions of these household water filters for you.

  

1. Choose a suitable location

To install household water filters, you must first choose a suitable location. The selection of the installation location is based on the original water pipeline. At the same time, consider whether it is convenient to use water, whether it is convenient to discharge sewage, whether it is convenient to use electricity, whether it is convenient to maintain, and whether it will freeze in cold weather, and whether it is harmonious with the overall space, etc. In addition, it is necessary to avoid children touching it.

A household pre-filter is a device that performs the first rough filtration of water in the whole house. It is generally installed after the household water meter. It can filter out sediment, rust, and large particulate matter in tap water, and can also stabilize water pressure and protect Water purification equipment behind.

The central water purification is connected to the back end of the pre-filter to remove various harmful substances such as sediment, rust, bacteria, suspended solids, algae, macromolecular organic matter that may be contained in the water. The direct drinking machine is generally connected from the back end of the central water filters, placed in the kitchen or living room, and the tap can be turned on to drink directly.

2. Check the local water quality

When installing water filters in different places, you also need to observe the local water quality. If you use municipal tap water, you can install them directly. If the local water quality is relatively poor, there are large particles of impurities, sediment, etc., it is recommended to install a pre-filter, which can effectively prolong the service life of the filter element and improve the filtering effect.

If the water pressure is relatively low in some places and the water filters cannot work normally, a separate booster pump needs to be installed. If it is a special place, such as an elevator room, where the water pressure is unstable, you need to install a voltage regulator valve. The installation site of the water filters must not be placed in a place exposed to the sun, otherwise, it will lead to accelerated aging of the internal filter element and affect the water quality.

3. When punching holes at the selected position, the depth and hole spacing should be accurate, the holes should be smooth, and there should be no cracks, gaps, or burrs around the hole.

4. When connecting with the water pipe, first close the main water valve, and then connect the water filters. The interface should be wrapped with raw tape to prevent water leakage.

5. When installing the faucet, if you want to install the faucet on the sink, the stainless steel sink can be opened with a home opener. If you want to fix the faucet on the wall, you can use the right-angle faucet hanging piece to fix the faucet on the wall, and the fixed part should be tightened.

6. Open the main water inlet ball valve, debug the water filters, and observe whether the joint is leaking. The observation period is at least 2 hours. You can put a clean dry towel under the water filters to check whether there is water seepage.

If you want to know more about household water filters after reading the above, please continue to pay attention to our news, we will update the relevant product knowledge in time.

We are an experienced manufacturer of household appliances, equipped with a professional production team and strict quality inspection system, which can control the quality of products in all aspects. Our products are sold all over the world and have won praise and trust from many customers. If you are interested in our water filters, please contact us immediately!