Household direct drinking water dispensers can weaken the water molecules in tap water to reach the standard of direct drinking water. And if we want to make the household direct water dispenser play its due effect, we must pay attention to the following items of installation and operation of the household direct water dispenser.

1 Prepare the installation tools in advance, disassemble the installation package of the household direct drinking machine, and check whether the organization of the household direct drinking machine is damaged and whether the parts are complete.

2. The formal installation of the direct water dispenser is divided into five steps, namely the pressure test before installation, the installation of the water purifier, the connection of the sewage outlet with other pipelines, the fixing of the water purifier, and the pipeline test.

3. The installation of the direct water dispenser is different from the installation of ordinary household appliances, and it is more concerned. From the overall principle, the installation of the direct water dispenser is a process that connects the water inlet and the water outlet.

3. Before installation, first determine the pressure range of the tap water. If the pressure is too high, install a pressure-reducing valve before the water inlet pipe reaches the pressure suitable for the direct water dispenser; if the pressure is too low, use a booster pump.

4. In the choice of the location of the direct water dispenser, careful consideration should be given to it. If it is connected to a hot water container, the direct water dispenser can be placed in a lower position.

5. Determine the location of the water purification port, connect the sewage outlet, the water outlet, and the water inlet to make it a circulatory whole. After passing the water inlet and outlet tests, the direct water dispenser is installed.

6. After the whole installation of the household direct drinking machine, you need to plug in the socket of the household direct drinking machine, turn on the power supply, and then run, check whether the household direct drinking machine can operate normally, check whether there is any abnormality, and take care to eliminate it.

1. Before the user goes out for a long time. You must cut off the power supply of the water dispenser at your fingertips, which can save energy and prevent electrical accidents.

2. When the ambient temperature (room temperature) is lower than 10 degrees, the cooling power supply should be turned off.

3. When using the water dispenser, it should be equipped with a leakage protection switch and connected to a solid and reliable ground wire to prevent leakage of the water dispenser and protect personal safety.

4. When using the water dispenser for the first time, water must be supplied first, and the water can only be energized after the two taps have water flowing out. It is strictly forbidden to use the water dispenser without water.

5. The water dispenser should be placed in a ventilated and dark place to avoid discoloration of the cabinet or damage to the parts by direct sunlight.

6. Children should not play next to the water dispenser. For the sake of children's safety, you can replace the hot water tap with a safety type tap to prevent scalding children.

7. When moving the compressor-type refrigerating water dispenser, it should be kept upright. If it is to be tilted, its inclination angle shall not be greater than 45 degrees; when using the compressor-type refrigerating water dispenser, after disconnecting the refrigeration power supply, it must go through 3-5 seconds to start again.

8. Do not put the metal rod into the back panel ventilation window, so as not to damage the fan or cause electric shock; do not cover the fan ventilation window to avoid damage to the semiconductor refrigeration components due to poor ventilation and poor heat dissipation.

9. If it is not used for a long time, it is necessary to turn off the power supply of the water dispenser to avoid damage to the parts due to dry heating.

10. When pressing the faucet to receive water, do not use too much force, just press it lightly. If you use too much force, the rotating part of the hand will easily come out or be damaged.

11. Do not supply power to the water dispenser for a long time. When there is no one at home or at night, please turn off the power switch of the water dispenser.

12. When the bucket of water is used up, it should be replaced with new water immediately. Long-term dry heating will cause the heat generated by the heater in the water dispenser to not be dissipated in time, and it may cause a fire when it reaches a certain temperature.

13. Do not place combustibles in the direct water dispenser to prevent the fire from spreading after a fire; when consumers buy a direct water dispenser, they must go to the regular dealers to buy products with quality assurance.

When we install and use the domestic direct water dispenser, we must ensure safety in the application process. If you still want to know more about the instructions for the use of household water dispensers, YIJIA Health is happy to share relevant knowledge with you.

We are an experienced manufacturer of household appliances, equipped with a professional production team and strict quality inspection system, which can control the quality of products in all aspects. Our products are sold all over the world and have won praise and trust from many customers. If you are interested in our water dispensers, please contact us immediately!